Serial Dilution Calculator
Calculate serial dilution concentrations, transfer volumes, diluent volumes and cumulative dilution factors. Generate step-by-step results and export your calculation to CSV.
Serial Dilution Calculator
Enter your initial concentration, transfer volume, final volume and number of dilution steps. This calculator assumes the same transfer and final volumes are used at each step.
Serial Dilution Results
Step-by-Step Calculation
Individual Dilution Stages
Review each stage below. The resulting concentration from one stage becomes the source concentration for the next.
| Step | Source Concentration | Transfer Volume | Diluent Volume | Final Volume | Step Factor | Cumulative Factor | Resulting Concentration |
|---|
The CSV file includes the input settings, calculation summary and all dilution stages.
What Is a Serial Dilution?
A serial dilution is a sequence of dilutions in which a portion of a solution is transferred into a diluent to produce a lower concentration. The resulting solution can then be used for the next dilution step.
Serial dilution is commonly used in laboratory procedures, analytical chemistry, microbiology and sample preparation when a range of lower concentrations is required.
Serial Dilution Formula
Vdiluent = Vfinal − Vtransfer
2. Dilution factor per step
DF = Vfinal / Vtransfer
3. Concentration after each step
Cn = Cn−1 × (Vtransfer / Vfinal)
4. Cumulative dilution factor for equal steps
DFcumulative = DFnHere, Vtransfer is the volume transferred from the source solution, Vfinal is the total final volume after dilution, and Cn is the concentration after step n.
Worked Example: 1:10 Serial Dilution
Assume an initial concentration of 10 mg/mL, a transfer volume of 1 mL, a final volume of 10 mL, and three dilution steps.
Diluent per step: 10 − 1 = 9 mL.
Step dilution factor: 10 / 1 = 10.
Step 1: 10 × (1/10) = 1 mg/mL.
Step 2: 1 × (1/10) = 0.1 mg/mL.
Step 3: 0.1 × (1/10) = 0.01 mg/mL.
Cumulative dilution factor: 10 × 10 × 10 = 1,000.
Final concentration: 10 / 1,000 = 0.01 mg/mL.
| Step | Source Concentration | Transfer | Diluent | Resulting Concentration | Cumulative Dilution |
|---|---|---|---|---|---|
| 1 | 10 mg/mL | 1 mL | 9 mL | 1 mg/mL | 10-fold |
| 2 | 1 mg/mL | 1 mL | 9 mL | 0.1 mg/mL | 100-fold |
| 3 | 0.1 mg/mL | 1 mL | 9 mL | 0.01 mg/mL | 1,000-fold |
How to Use This Calculator
- Enter the initial concentration of your stock solution.
- Select the concentration unit that describes the starting concentration.
- Enter the transfer volume used at each dilution stage.
- Select the volume unit and enter the final volume per stage.
- Enter the number of dilution steps.
- Select Calculate to display the final concentration and stage-by-stage results.
- Select Download Results as CSV to export the calculation.
Understanding Dilution Factors
A dilution factor expresses how many times the source solution has been diluted. A 10-fold dilution means the final concentration is one-tenth of the source concentration.
When each step has the same dilution factor, the overall factor is the per-step factor raised to the number of steps. For example, three successive 10-fold dilutions produce an overall 1,000-fold dilution.
Concentration Units and Volume Units
The concentration dropdown lets you label the starting concentration in common units such as mg/mL, µg/mL, g/L, mol/L or CFU/mL. The selected unit is carried into the output for readability.
The calculator does not convert between concentration units. If a conversion is needed, convert the initial value first and select the corresponding unit. The transfer volume and final volume must always use the same volume unit.
Assumptions and Limitations
- The same transfer volume and final volume are used for every step.
- The final volume must be greater than the transfer volume to create a dilution.
- The calculation assumes ideal mixing and does not account for pipetting errors, evaporation, sample loss, adsorption or chemical degradation.
- Concentration units are labels only; the calculator does not convert units.
- CFU/mL, molar concentration, mass concentration and percentage concentrations describe different measurement conventions. Choose the label appropriate for your sample.
- For laboratory use, follow the applicable validated method, safety procedures and equipment instructions.
Frequently Asked Questions
What is a serial dilution calculator?
It calculates the concentration after repeated dilution steps using an initial concentration, transfer volume, final volume and number of steps.
How do I calculate a 1:10 dilution?
Transfer one part of the source solution and add diluent until the total final volume is ten parts. For example, transfer 1 mL and bring the total volume to 10 mL.
How do I calculate the dilution factor?
Divide the final volume by the transfer volume. A 10 mL final volume with a 1 mL transfer gives a factor of 10.
How do I calculate the final concentration?
Divide the initial concentration by the cumulative dilution factor, or calculate the concentration successively at each step using the transfer-to-final-volume ratio.
How much diluent is required?
Subtract the transfer volume from the desired final volume. For a 1 mL transfer and a 10 mL final volume, add 9 mL of diluent.
What does a 1:1000 dilution mean?
The final concentration is one-thousandth of the starting concentration, assuming ideal dilution. Three consecutive 1:10 dilutions produce an overall 1:1000 dilution.
Can I use microliters?
Yes. Select µL and enter both the transfer volume and final volume in microliters.
Does the calculator convert concentration units?
No. It carries the selected concentration unit as a label. Convert the initial concentration separately when a different unit is required.
Can I calculate multiple dilution steps?
Yes. Enter a whole number from 1 to 100 to calculate each dilution stage and the cumulative dilution factor.
Can I export the results?
Yes. After calculating, select Download Results as CSV. The file contains the calculation settings, summary and individual dilution stages.
Related Calculators
Disclaimer
This calculator is an educational and mathematical aid. Results assume ideal dilution and mixing and should be checked against the requirements of the specific laboratory procedure. It does not replace validated methods, laboratory protocols or professional scientific judgment.
